Top Selling 10 Normet Products
TamPur 150 ECO
TamPur 150 ECO is part of our new ECO range and is a single component hydrophilic polyurethane in combination with polyether polyols. It only reacts when it comes in contact with water to form a flexible polyurethane seal.
TamPur 130 ECO
TamPur 130 is part of our new ECO range and is a single component, high foaming, semi flexible water reactive polyurethane injection resin. TamPur 130 (ECO Range) has been formulated to effectively seal cracks and joints in construction that exhibit a degree of movement, forming a semi flexible, closed cell foam sealant. The reaction speed of the resin can be adjusted using TamKat 130 providing flexibility on the job site. TamPur 130 (ECO Range) is phthalate free and environmentally friendly.
TamPur 130 (ECO Range) is tested according to EN1504-5 in compliance with CE-marking.
TamPur 125 ECO
TamPur 125 ECO is a high-performance polyurethane injection resin designed for water ingress control, groundwater sealing and structural stabilization in underground mining and tunnelling. Its rapid reaction and high expansion characteristics enable fast and reliable water cut-off, helping protect underground excavations from active water inflows and hydrostatic pressure.
Designed for heavy and active water ingress, TamPur 125 delivers variable gel times, high expansion and a strong, rigid closed-cell structure that resists washout and withstands high hydrostatic pressure. Its durable chemical resistance ensures long-term performance, supporting safer, more stable underground structures worldwide.
As part of Normet’s ECO Range, TamPur 125 is phthalate-free and formulated with environmental responsibility in mind—offering effective water control without compromising on performance. The product is tested according to EN 1504-5 and CE-marked, ensuring compliance with European standards for injection products used in concrete structures.
From emergency water stoppage to long-term water control solutions, TamPur 125 supports predictable results and efficient project execution
TamSeal 10F
TamSeal 10F is a two-component acrylic-modified cementitious coating that requires only on-site mixing to form the ideal product to waterproof and resurface concrete, masonry and most other construction materials. TamSeal 10F comes in two grades Standard for general application and HDB for higher flexibility requirements. TamSeal 10F provides an effective barrier to waterborne salts and atmospheric gases. It also provides a hardwearing, seamless, waterproof membrane for roofs and concrete protection. TamSeal 10F should not be left unprotected, but covered by tiles or other protective coatings.
TamSeal 800
TamSeal 800 is a high-performance, single-component EVA polymer, flexible waterproofing membrane. In large applications, TamSeal 800 can be spray applied using a dry rotor machine by hand or robotic spraying. For smaller applications, it can be applied by brush. TamSeal 800 provides a tough, durable, seamless, waterproofing membrane for many structures including tunnels, shafts and caverns.
TamAcryl 2000
TamAcryl 2000 is part of our new ECO range and is an ultralow viscosity, hydrophilic acrylic injection resin formulated to produce a highly resilient flexible gel gasket. TamAcryl 2000 (ECO Range) ultralow viscosity enables excellent penetration capability into the finest cracks and joints. TamAcryl 2000 (ECO Range) is also commonly used as permanent primary injection, for second pass injection to tighten up and for injection tubes. TamAcryl 2000 (ECO Range) is water based, environmentally friendly and certified for use with potable water. TamAcryl 2000 (ECO Range) is tested according to EN1504-5 in compliance with CE-marking.
TamAcryl 3000
TamAcryl 3000 is part of our new ECO range and is an ultralow viscosity, hydrophilic acrylic injection resin formulated to produce a highly resilient, polymer extended flexible gel gasket with high performance suitable for expansion joints. TamAcryl 3000 (ECO Range) ultralow viscosity enables excellent penetration capability into the finest cracks and joints. TamAcryl 3000 (ECO Range) also commonly used as permanent primary injection, for second pass injection to tighten up and for injection tubes. TamAcryl 3000 (ECO Range) is water based and environmentally friendly. TamAcryl 3000 (ECO Range) is tested according to EN1504-5 in compliance with CE-marking.
TamSil 290
TamSil 290 is a water-based, silane-siloxane system which penetrates deeply into porous substrates to allow for a bonded hydrophobic lining to the pores. This treatment significantly reduces the absorption of water and waterborne salts but still allows the passage of water vapour. The solution does not produce any discolouration of the substrate and has excellent resistance to weathering.
GeoTek LV
GeoTek LV is a low viscosity, single shot polyurethane based on MDI in combination with polyether polyols and an amine based catalyst. The system only reacts when it comes into contact with water, forming a rigid polyurethane foam.
TamRez 210
TamRez 210 is a low modulus, extra low viscosity, epoxy adhesive designed to be injected into cracks which exhibit minor movement or are subject to shock or vibration. Its low viscosity allows maximum penetration into small, hairline cracks or fractures. After injection and in its cured state, TamRez 210 returns structural integrity and protects reinforcement while at the same time compensating for minor movement and vibration.
