Top Selling 10 Fosroc Products

Renderoc HB40

Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. Meets the requirements of EN1504-3 Class R3. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.

Renderoc HB

Renderoc HB is a lightweight, high build concrete repair mortar for patching small sections in concrete up to 25 MPa. It can be applied to vertical concrete patches 10mm to 80mm deep.

Renderoc LA55

Renderoc LA55 is a high strength, free-flowing micro-concrete reinstatement mortar for form and pour applications up to 200mm thick. Renderoc LA55 meets the requirements of EN1504-3 Class R4. Suitable for use with Galvashield anode protection systems

Renderoc HB70

Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.

Nitofill PU 130

Nitofill PU130 is a multi-purpose hydrophobic polyurethane injection resin which is mixed with nominated levels of accelerator to initiate expansion in the product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations.

Nitofill PU 140

Nitofill PU140 is a multi-purpose, single-component polyurethane injection resin that reacts with water to expand and seal leaking cracks, joints and voids, forming a durable, impermeable elastomeric seal to stop water ingress.

Nitofill PU 150

Nitofill PU150 is a multi-purpose hydrophilic polyurethane injection resin which reacts with available water to initiate expansion in the product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations.

Conbextra EP120 Plus

Conbextra EP120 Plus is a high-performance, two-part epoxy grout designed for heavy-duty industrial applications where dynamic and repetitive loads are encountered. Ideal for large-volume pours, it delivers exceptional compressive strength, superior flow, and virtually zero shrinkage for complete surface contact and reliable load transfer. Unlike traditional systems, EP120 Plus requires no additional aggregate, saving time and labour while ensuring consistent quality. Best suited for grouting base plates, heavy machinery, and equipment in steelworks, this versatile epoxy grout performs in wide gap ranges (50mm–120mm) and high ambient temperatures. Resistant to oils, chemicals, and seawater, Conbextra EP120 Plus offers long working time, low exotherm properties, and proven durability, making it the ultimate solution for demanding environments.

Nitoseal SC800

Nitoseal SC800 is a low modulus, hight joint movement accommodation, one component silicone rubber joint sealant, with Roadseal® technology.

Nitoprime Zincrich

Nitoprime Zincrich is the recommended anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and helps prevent the generation of incipient anodes in immediately adjacent locations.